網站公告:

新聞中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.vitagia.com

業內資訊

當前位置:首頁 - 新聞中心 - 業內資訊 - 氣動增壓泵為什么要加裝二

氣動增壓泵為什么要加裝二聯體?

發布時間:2021-08-23 15:57:01   發布人:http://www.vitagia.com
二聯件的別稱:氣源處理二聯件。那么它在氣動增壓類設備發揮著哪些作用呢?
Another name of duplex: air source processing duplex. So what role does it play in pneumatic pressurization equipment?
氣壓增壓泵二聯體中過濾度一般為50-75μm,調壓范圍為0.5-10Mpa,如需過濾精度為5-10μm,10-20μm,25-40μm,及調壓為0.05-0.3Mpa,0.05-1Mpa二聯體無管連接而成的組件稱為二聯件。
The filtration degree in the two-part pneumatic booster pump is generally 50-75 μ m. The pressure regulating range is 0.5-10mpa, and the filtering accuracy is 5-10 if required μ m,10-20 μ m,25-40 μ m. And the components with pressure regulation of 0.05-0.3mpa and 0.05-1mpa are called duplex components without pipe connection.
二聯件是多數氣動增壓系統中不可缺少的氣源裝置,需要安裝在用氣設備近處,是壓縮空氣整體質量的保證,氣動增壓類產品能否得到良好運行的重要保障。
The duplex is an indispensable air source device in most pneumatic pressurization systems. It needs to be installed near the air equipment. It is the guarantee of the overall quality of compressed air and the important guarantee for the good operation of pneumatic pressurization products.
氣動增壓泵
三聯體的安裝順序依進氣方向分別為空氣過濾器、減壓閥和油霧器。空氣過濾器和減壓閥組合在一起可以稱為氣動二聯件。由于氣動增壓產品的增壓缸及驅動缸體是分開的,二聯體內部的油霧器需要加裝潤滑油對驅動缸體進行潤滑。但不會對被增壓的介質照成污染。
The installation sequence of the triplet is air filter, pressure reducing valve and oil mist according to the air inlet direction. The combination of air filter and pressure reducing valve can be called pneumatic duplex. Since the booster cylinder and drive cylinder of pneumatic booster products are separated, the oil mist inside the two conjoined bodies needs to be lubricated with lubricating oil to lubricate the drive cylinder. But it will not pollute the pressurized medium.
減壓閥可對氣源進行穩壓,使氣源處于恒定狀態,不會對菲恩特動增壓類產品照成損傷(驅動氣壓應≤8.3bar)可減小因氣源氣壓突變時對氣動增壓泵或增壓設備的損傷。過濾器用于對氣源的清潔,可過濾壓縮空氣中的水份,避免水份隨氣體進入氣動增壓泵內部照成氣動增壓泵壽命下降。
The pressure reducing valve can stabilize the air source, keep the air source in a constant state, and will not damage feiente dynamic pressurization products (the driving air pressure shall be ≤ 8.3bar), which can reduce the damage to the pneumatic booster pump or pressurization equipment due to the sudden change of air pressure of the air source. The filter is used to clean the air source. It can filter the water in the compressed air to prevent the water from entering the pneumatic booster pump with the gas, resulting in the decline of the service life of the pneumatic booster pump.
油霧器可對氣動增壓泵驅動部分進行潤滑,可以對加潤滑油的部件進行潤滑,大大延長氣動泵的使用壽命。
The oil atomizer can lubricate the driving part of the pneumatic booster pump and the lubricated parts, greatly prolonging the service life of the pneumatic pump.
有上訴介紹可以看到,一個小小的二聯體可以為您廠內的氣動氣體增壓、及液體增壓泵等產品帶來很多的好處,且它們的價格也不貴,配置一個實在是一個明智的選擇。
It can be seen from the introduction that a small binary can bring a lot of benefits to the pneumatic gas booster, liquid booster pump and other products in your factory, and their price is not expensive. It is a wise choice to configure one.
新聞推薦:
氣體增壓泵產品本身也有很多亮點! 2021-12-13
氣液增壓泵的介質及使用分析 2021-12-06
高壓氣孔針閥安裝要注意什么? 2021-11-25
氣液增壓缸優缺點有哪些? 2021-11-15
氣動空氣增壓閥受歡迎的原因 2021-11-07
氣體增壓泵怎么設計才能保證質量? 2021-10-26
為什么啟動空氣增壓泵有時候會出口壓力... 2021-10-18
“溫度太低”對壓縮空氣增壓閥有什么影響? 2021-10-15
氣體增壓系統是怎么進行無極調壓的? 2021-10-08
四步教你選出合適的增壓泵設備! 2021-09-30

13188935873

qq

黑人巨茎大战俄罗斯美女