網站公告:

新聞中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.vitagia.com

常見問題

當前位置:首頁 - 新聞中心 - 常見問題 - 氣液增壓泵施工步驟是先怎

氣液增壓泵施工步驟是先怎么操作?

發布時間:2021-11-18 16:48:07   發布人:http://www.vitagia.com
1.增壓前準備準備一個手動操作的泵:
1. Prepare a manually operated pump before pressurization:
★連接管路(驅動氣源管路、液體介質輸入管路和高壓輸出管路)。★打開驅動氣源開關,緩慢調節驅動氣源壓力,使泵啟動。
★ connect the pipeline (drive air source pipeline, liquid medium input pipeline and high-pressure output pipeline). ★ turn on the drive air source switch and slowly adjust the drive air source pressure to start the pump.
★設置驅動氣壓力。
★ set the driving air pressure.
2.增壓過程泵的升壓過程∶
2. Boosting process of booster pump:
★當驅動活塞背向泵頭運行時,出口單向閥關閉,入口單向閥打開將液體吸入泵內,流體被吸入泵頭;活塞運動到后端底部時觸動循環閥換向。
★ when the driving piston runs away from the pump head, the outlet check valve is closed and the inlet check valve is opened to suck the liquid into the pump and the fluid is sucked into the pump head; When the piston moves to the bottom of the rear end, it touches the reversing of the circulating valve.
氣液增壓泵
★循環閥換向后活塞向另一端運動,使活塞桿壓縮泵頭內的流體,入口單向閥關閉,出口單向閥打開,流體被泵出;活塞運動到前端底部時觸動循環閥換向。★活塞往復運動,流體持續被泵出到泵出口端,實現后端
★ when the circulating valve is reversed, the piston moves to the other end, so that the piston rod compresses the fluid in the pump head, the inlet check valve is closed, the outlet check valve is opened, and the fluid is pumped out; When the piston moves to the bottom of the front end, it triggers the reversing of the circulating valve. ★ the piston moves back and forth, and the fluid is continuously pumped out to the outlet end of the pump to realize the rear end
3.到達壓力并保壓增壓。泵達到輸出壓力并保壓的過程∶★當泵輸出壓力與氣源驅動壓力按輸出比平衡后;泵停止動作。★泵保持輸出壓力,此時泵不動作,沒有氣源消耗,也沒有發熱。
3. Reach the pressure and maintain the pressure for pressurization. The process when the pump reaches the output pressure and maintains the pressure: ★ when the pump output pressure and the air source driving pressure are balanced according to the output ratio; The pump stops. ★ the pump maintains the output pressure. At this time, the pump does not act, there is no air consumption and no heating.
★如果泵出口壓力下降,泵重新自動啟動。
★ if the pump outlet pressure drops, the pump will restart automatically.
新聞推薦:
氣體增壓泵在工廠使用要注意哪些優勢? 2021-12-09
氣體增壓泵空氣增壓泵可以使用多長時間? 2021-11-30
氣液增壓泵施工步驟是先怎么操作? 2021-11-18
氣液增壓機的上模安裝要注意什么? 2021-11-10
氣體增壓泵與氣液增壓泵的區別! 2021-10-20
為什么氣體增壓泵經常突然不工作了? 2021-10-13
氣體增壓設備一般的組成部分是? 2021-10-06
冬季來臨,氣動增壓泵容易出那些問題? 2021-09-27
想要降低氣動空氣增壓泵系統的溫度能采... 2021-09-17
氣體增壓泵與氣液增壓泵的區別 2021-09-10

13188935873

qq

黑人巨茎大战俄罗斯美女