網站公告:

新聞中心

濟南精拓流體設備有限公司

電話:0531-69951198

郵箱:jingtuolt@163.com

傳真:0531-69951198

地址:濟南市歷城區西周南路9號

網址:http://www.vitagia.com

常見問題

當前位置:首頁 - 新聞中心 - 常見問題 - 氣體增壓泵在工廠使用要注

氣體增壓泵在工廠使用要注意哪些優勢?

發布時間:2021-12-09 16:26:46   發布人:http://www.vitagia.com
1,噪音低,體積小,低至60分貝。較電動靜音壓縮機來說靜音也占有優勢,且占地面積小。效率高。
1. Low noise, small size, as low as 60 dB. Compared with the electric mute compressor, mute also has advantages, and the floor area is small. efficient.
2,輸出壓力高,壓力無極可調,通過調整驅動氣壓就可以調整輸出壓力,輸出壓力與驅動氣壓成倍數關系,待到輸出壓力與驅動氣壓成倍數關系,設備就自動停止,不在耗氣,低于設定值壓力,自動補充壓力損耗。
2. The output pressure is high and the pressure is infinitely adjustable. The output pressure can be adjusted by adjusting the driving air pressure. The output pressure is in multiple relationship with the driving air pressure. When the output pressure is in multiple relationship with the driving air pressure, the equipment will automatically stop without gas consumption. If the pressure is lower than the set value, the pressure loss will be automatically supplemented.
3,安全、防爆、無火花。氣動增壓產品,沒有電機驅動,無油潤滑的構造,使其在煤礦及危險場合可以進行使用。
3. Safe, explosion-proof and spark free. Pneumatic pressurization products have no motor drive and oil-free lubrication structure, so that they can be used in coal mines and dangerous occasions.
4,節省成本,在某些方便可以避免購買大型電動壓縮設備的成本。如工廠氣壓的某一個點需要的壓力較高,可以采用菲恩特牌氣體增壓泵。
4. Cost saving. In some convenience, the cost of purchasing large electric compression equipment can be avoided. If the pressure required at a certain point of the factory air pressure is high, feiente brand gas booster pump can be used.
氣液增壓泵
需要注意哪些事項:
What should be noted:
1,確定自己的現場驅動氣壓與被增壓介質的入口壓力。
1. Determine your own on-site driving air pressure and the inlet pressure of the pressurized medium.
2,了解自己所需的使用壓力、及工裝的常用壓力。
2. Understand the maximum use pressure required by yourself and the common pressure of tooling.
3,另外對自己現場使用的工況也要有一個明確的認識,比如說流量的需求。往往流量是一個氣體增壓能否被客戶使用的一個重要因素。
3. In addition, you should have a clear understanding of the working conditions used on site, such as the demand for flow. Often, flow is an important factor whether a gas pressurization can be used by customers.
新聞推薦:
氣體增壓泵在工廠使用要注意哪些優勢? 2021-12-09
氣體增壓泵空氣增壓泵可以使用多長時間? 2021-11-30
氣液增壓泵施工步驟是先怎么操作? 2021-11-18
氣液增壓機的上模安裝要注意什么? 2021-11-10
氣體增壓泵與氣液增壓泵的區別! 2021-10-20
為什么氣體增壓泵經常突然不工作了? 2021-10-13
氣體增壓設備一般的組成部分是? 2021-10-06
冬季來臨,氣動增壓泵容易出那些問題? 2021-09-27
想要降低氣動空氣增壓泵系統的溫度能采... 2021-09-17
氣體增壓泵與氣液增壓泵的區別 2021-09-10

13188935873

qq

黑人巨茎大战俄罗斯美女